Fairway
Lounge Gas Specifications
|
|
DIMENSIONS |
|
OVERALL LENGTH
|
114.8 in. (2915 mm) |
|
OVERALL WIDTH
|
48.9 in. (1243 mm)
|
|
OVERALL HEIGHT (with
canvas canopy) |
76.5 in. (1943 mm) |
|
WHEELBASE
|
74.8 in. (1900 mm) |
|
FRONT WHEEL TREAD
|
35.6 in. (980 mm)
|
|
REAR WHEEL TREAD
|
35.6 in. (980 mm)
|
|
MINIMUM GROUND CLEARANCE
|
4.5 in. (115 mm)
|
|
ENGINE/DRIVE TRAIN |
|
ENGINE TYPE
|
Yamaha built, low emission
single cylinder 60° incline OHV |
|
DISPLACEMENT
|
357 cm³ |
|
BORE x STROKE
|
85 x 63 mm |
|
HORSEPOWER
|
11.4 HP (8.5 Kw/3500 rpm) |
|
COMPRESSION RATIO
|
8.1:1 |
|
LUBRICATION SYSTEM
|
Splash style positive oil
lubrication |
|
OIL CAPACITY
|
1 U.S. quart (1 liter, 1000
cc) |
|
AIR CLEANER
|
Two stage, urethane-foam
pre-cleaner and high-capacity pleated paper cartridge |
|
COOLING SYSTEM
|
Forced air |
|
CARBURETOR
|
Mikuni BV26-18 |
|
IGNITION SYSTEM
|
Transistor magneto ignition
|
|
TRANSAXLE
|
Continuously variable
v-belt automatic forward/reverse transaxle equipped with high-precision
helical gears, 15.38:1 drive axle ratio |
|
CHASSIS |
|
FRAME |
Seamless tubular
ladder-style steel frame protected with an anti-corrosive full-immersion
phosphate treatment, electro-deposition epoxy-based undercoat and an
electrostatically applied polyester/urethane powder topcoat |
|
BODY FRONT:
|
Custom-formulated
thermoplastic olefin; front is painted with a two-part topcoat of
high-luster automotive grade polyurethane |
|
REAR: |
Vaccum-formed ABS plastic
coated with tough UV-resistant Solarkote |
|
STEERING
|
Adjustable worm gear and
pitman pin system, permanently lubricated |
|
FRONT SUSPENSION
|
Fully independent
suspension with individual coil springs and hydraulic shock absorbers
|
|
REAR SUSPENSION
|
Mono-link rear suspension
with coil springs over hydraulic shock absorbers |
|
BRAKES |
Self-adjusting, mechanical
drum brakes on all 4 wheels |
|
SEATING |
Seamless, fabric-backed
vinyl over new, high density molded foam cushions mated to a warp and
moisture-resistant polypropylene seat bottom |
|
BUMPER |
Front 5 mph
energy-absorbing bumper |
|
PERFORMANCE |
|
MAX FORWARD SPEED
|
15 mph (24 km/h) |
|
TURNING RADIUS
|
10.8 ft (3.3 m)
|
|
DISPLAY
CABINET / COLD STORAGE |
|
DISPLAY CABINET
|
Features 7 individual
storage compartments with durable locking polycarbonate doors, 2.5 gallon
hot or cold Cambro beverage dispenser, locking stainless steel and a rear
mounted cup dispenser that accommodates conventional 6 to 10 oz. cups. |
|
COLD STORAGE
COMPARTMENT |
Features a gel-coated,
UV-resistant base with 1.75" polyurethane insulated panels and a single
bottom-mounted drain with shut-off valve. Holds 16 cases of canned drinks
and ice. Meets NSF material standards for distribution of prepackaged
foods. Can be special ordered to match body panels. |
|
GENERAL |
|
DRY WEIGHT (less
battery) |
851 lbs (386 kg)
|
|
CARGO BOX MATERIAL
|
Roto-molded linear
Polyethylene |
|
FUEL TANK CAPACITY |
7.9 U.S. gal (30.0 liters) |
|
TIRE SIZE
|
18.00 x 8.50-8.00 (4-ply
rating on front tires; 6 ply rating on rear tires) |
|
SEATING CAPACITY
|
2 persons |
|
AVAILABLE PAINT COLORS
|
Hunter Green (standard),
Glacier, Garnet, Sandstone Metallic, Cobalt Metallic, Anthracite Metallic,
Onyx Metallic |
|
AVAILABLE SEAT COLORS
|
Gunmetal Grey |
|
AVAILABLE CANVAS CANOPY
COLORS |
Hunter Green Canvas Canopy*
(standard) * Canvas Canopy can be ordered in a variety of custom colors
and patterns |
|
WARRANTY |
|
Warranty |
2-year limited vehicle warranty |
